Top-level roof ventilation
T7 WIND VENTILATED SOFFIT SYSTEM
To meet your expectations, we introduce T7 WIND – a ventilated soffit system.
The T7 WIND ventilated soffit provides protection for your roof against water, moisture, birds, pests, and insects. It ensures ventilation and thermal insulation. It also serves an aesthetic function, concealing all unnecessary roof elements.
Available colors
RAL 7016
RAL 8017
RAL 9005
RAL 9010
Colours in the sample book on our website are illustrative and may vary from the actual colour.
Available colors
RAL 7016
RAL 8017
RAL 9005
RAL 9010 Połysk
Colours in the sample book on our website are illustrative and may vary from the actual colour.
T7 WIND – system components
Ventilated soffit panel (cut to size).
WIND type J strip (length 1200 mm).
WIND cover (length 1200 mm).
Options for finishing the soffit in building corners
Perpendicular connection with the cover.
Diagonal connection without a cover, using type J strips.
Installation of the T7 WIND soffit
The soffit is mounted on a leveled supporting structure made of dry and impregnated wooden battens with minimum dimensions of 25 x 50 mm. The spacing of the battens should not exceed 40 cm. We recommend mounting the soffit boards perpendicular to the wall surface.
Eaves projection up to 40 cm.
Eaves projection over 40 cm.
Listwy typu J
J-type strips are mounted along the perimeter of the roof structure to the battens. The soffit panels are screwed to the J-type strips approximately every 30 cm.
Supporting structure
The soffit is mounted to the supporting structure using flat anti-corrosion screws with a minimum length of 20 mm and a head size of at least 8 mm. They should be screwed in perpendicularly, taking care not to cause dents.
Where to buy
The Hanbud product sales network includes several hundred points in all provinces
Check available locations and choose the nearest point.